Table of Contents
Advertisement
Adjust the speaker volume.
@ Press to select TEST TONE.
SETUP
me
© Adjust the level of the speaker emitting
the test tone. Each speaker should pro-
duce the test tone at the same volume
level as the front speakers.
TUNING/SKIP
To increase
To decrease
GB Adjust the delay time.
@ Calculate the delay time suitable
for your | ,
listening room
(see below}.
© Press to select delay time.
Keg
Eel
SETUP
© Adjust the delay time.
TUNING/SKIP
To increase
To decrease
@ Press SETUP again to quit.
© Press VIDEO onceto return theremoteto
[ |
its original operating mode.
VIDEO
1070VR/1060VR [En/K)
'SURROUND
Initial display when the test tone is selected
* The buzzing test tone moves once every 1.5 seconds.
@"TESTL"
: Front speaker, left channel.
@"TESTC"
: Center speaker.
@ "TEST R"
Front speaker, right channel.
@ "TEST RS" : Surround speaker (right).
® "TEST LS" : Surround speaker (left).
pupetere ts
+ Td
Th
sumone
fee Ae FD
Vt ob!
Display when the test tone is output from the left speaker
* Be sure to adjust from your listening position.
* Tne volume Is adjusted In 1dB steps each time you press the TUNING/
SKIP +/- keys.
* The volume levels can be adjusted in the range from ~10 dB to +10 dB.
vane
mae
rcs aad
Display wher delay linc is oelevted
* The delay time can be adjusted in the range from 15 ms to 30 ms, in 5
ms steps.
* This adjustment is also possible with the LEVEL CONTROL key of the
main unit.
What is delay time?
The sound entering the ears include the direct sound coming from the
sound source and the indirect sounds reflected from the walls, floor,
ceiling, etc. The indirect sounds are delayed because they travel
longer distance required for reflection before they reach the ears. The
delay time is the difference in time between the direct sound and
indirect sounds.
* The input selector does not change the first time you press the VIDEO
key.
How to calculate the proper delay time
Assuming that the distance from the front speaker is A meters
and the distance from the surround speakers is B meters
Front
+
speakers
Am
a
Surround speakers
@ Use the delay time calculation chart on the right.
Example: When A = 3 m, B = 3 m, the delay time is 20 ms.
@ Use the following formula for calculation.
Delay time = 20+ 3 x (A- B} (Unit: ms)
Advertisement
Table of Contents
