Table of Contents
Advertisement
Sweep Time
0.2 us/div to 0.5 s/div,
+3%
in 20 ranges, in
1-2-5 sequence.
Vernier control provides
fully adjustable sweep
time between steps.
Sweep Magnification
CS-1021
CS-1012
CS-1020
+3%
1-2-5
Vernier control provides
fully adjustable sweep
time between steps.
0.5 us/div to 0.5 s/div,
in 19 ranges, in
sequence.
0.2 us/div to 0.5 s/div,
+3% in 20 ranges, in
1-2-5 sequence.
Vemier control provides
fully adjustable sweep
time between steps.
0.5 us/div to 0.5 s/div,
+ 3% in 19 ranges, in
1-2-5 sequence.
Vernier control provides
fully adjustable sweep
time between steps.
Linearity
TRIGGERING
Internal Sync
CH1;
CH2;
+3% all ranges,
+5% on 0.2 ys/div range at x 10 magnification.
x 10 (ten times)
+5%
Triggered by input signal selected
by vertical MODE setting.
Triggered by CH1 signal
Triggered by CH2 signal
Triggered by line voltage
INT;
Triggered by vertical input signal
LINE;
Triggered by line voltage
External Sync
External sync Input
Impedance
1 MQ, +2%
approx. 32pF
J
EXT;
TRIG INPUT jack
Triggered by signal applied to EXT
1 MOQ, +2%
approx. 35pF
1 MQ, +2%
approx. 30pF
1 MQ, +2%
approx. 30pF
Maximum External
Trigger Voltage
50 V (DC+ AC peak)
Coupling
Tigger Sensitivity
FREQ, RANGE
INT
EXT
20Hz to 20MHz
1div
0.1Vp-p
10Hz to 20MHz
= idiv.
-0.1Vpp
Sensitivity
FREQ, RANGE
INT
EXT
20Hz to 20MHz
Idiv 0.2Vp-p
PROBE ADJ. VOLTAGE
INTENSITY MODULATION
AC, VIDEO FRAME, VIDEO LINE
FREQ, RANGE
INT
EXT
FRAME, LINE
\div 0.1Vp-p
FREQ, RANGE
20Hz to 10MHz
Idiv 0.1Vp-p | 20Hz to 20MHz
1O0Hz to 1OMHz ~~ Idiv_ 0.1Vp-p | 10Hz to 20MHz
FRAME, LINE
1div 0.1Vp-p
0.5 V, +6%, square wave, positive polarity, approx. 1 kHz
(NT
EXT
FREQ, RANGE
INT
= EXT
Idiv 0.1Vp-p | 20Hz
to 10MHz
1div 0.1Vp-p
1div 0.1Vp-p
|10H2z to 1OMHz
div
O.1Vpp
FRAME, LINE
Idv 0.1Vp-p
Positive voltage increases brightness.
Negative voltage decreases brightness.
TTL compatible
Input Impedance
Approx. 10 kQ
Usable Frequency Range
DC to 1 MHz
Maximum Input Voitage
[pc to 2 MHz
50 V (DC +AC peak)
| DC to 2 MHz
OUTPUT
VERTICAL AXIS SIGNAL
CH1 SIGNAL OUTPUT
CH1 SIGNAL OUTPUT
| DC to 1 MHz
VERTICAL SIGNAL OUTPUT
Output Voltage
Approx. 50mV/div
(50 Q load)
Output Impedance
Approx. 50 2
Approx. 50 mV/div (50 © load)
Frequency Response
100 Hz to 20 Mtz,
—3 dB (50 2 load)
100 Hz to 10
Approx. 50 2
100 Hz to 20 MHz,
MHz,
—3 dB (50 © load) | —3 dB (50 © load)
100 Hz to 10 MHz,
—3 dB (50 Qload)
TRACE ROTATION
Electrical, adjustable from front panel
POWER REQUIREMENT
eee
Power Consumption
AC 100/120/220/240 V +10%
50/60 Hz
Approx. 43 W
| Approx. 39 w
|
Approx. 41W
Approx. 38W
Approx. 36W
DIMENSIONS
Width
( ) dimensions include protrusions from basic outline dimensions.
260 mm
(260 mm)
160 mm
(180 mm)
400 mm (460 mm)
Advertisement
Table of Contents
