Table of Contents
Advertisement
Resetting the charcoal filter operat-
ing hours counter (only
KMDA 7676 FL-U)
The operating and installation instruc-
tions supplied with the recirculation box
state that the operating hours counter
for the charcoal filter needs to be activ-
ated. This is not necessary here.
The charcoal filter symbol also ap-
pears when the vapour extraction is op-
erated using extraction mode.
Touch the sensor control for
3 seconds.
The sensor control will go out.
Cleaning and care
Cleaning the vapour extraction
drip tray
Clean the drip tray if liquid from food
being spilled or boiling over has got into
the vapour extraction unit.
Remove and clean the grease filter as
described in "Cleaning and care –
Grease filter".
Push the plastic bracket to the left
until the drip tray can be pulled
downwards .
Pour out the liquid.
Clean and dry the drip tray.
Also clean and dry accessible areas
inside of the vapour extraction unit.
Fasten the drip tray back onto the
casing.
Replace the grease filter and refit the
cover grille.
Cleaning inside the vapour ex-
traction casing
Remove the grease filter (see "Clean-
ing and care – Removing the grease
filter").
Clean off any accessible oil or fat
build-up from the casing.
65
Advertisement
Table of Contents
