Table of Contents
Advertisement
Installation
Additional safety notes for flush-fit installation
Damage from unsuitable sealant.
Unsuitable sealant can damage natural stone.
For natural stone worktops and natural stone tiles, only use silic-
one sealant that is specially formulated for natural stone. Follow
the manufacturer's instructions.
The internal width of the base unit underneath the appliance must
be at least as wide as the inner worktop cut-out (see "Installation –
Building-in dimensions for flush-fit installation"), so that the hob is
easily accessible from underneath after installation and the casing
can be removed for maintenance. If the underside of the hob is not
freely accessible after installation, any sealant used must be re-
moved to enable the hob to be lifted out of the cut-out should this be
necessary.
A flush-fit hob is suitable only for installation in natural stone
(granite, marble), solid wood and tiled worktops. When using a work-
top made from any other material, please check first with the work-
top manufacturer that it is suitable for installing a flush-fit hob.
- Natural stone worktops: the hob is set directly in the cut-out.
- Solid wood worktops, tiled worktops: the hob is secured inside
the cut-out with wooden battens. The battens must be provided
on site and are not included in the scope of delivery.
80
Advertisement
Table of Contents
