Table of Contents
Advertisement
1 4
R E S T R I C T E D
6. AROFLEX is switched into the OFF-LINE mode by pushing
the spring-loaded OFF-LINE button (2). The lamp inside this button
lights.
To switch AROFLEX back into the STANDBY mode, with the
contents of the memory still alive, push the OUT button (3).
All lamps will now be extinguished.
7. AROFLEX is switched off completely only when the mains supply
is switched off.
As soon as AROFLEX is switched off, the Battery Drain Indi
cator (25) lights, denoting that the hold batteries are switched on
to keep the contents of the memory alive.
The batteries can supply the memory for about 90 minutes and
are switched off automatically as soon as the battery voltage
drops below a pre-set threshold value. To stop the drain (and
consequently reset the memory to zero) push the red "zeroize"
button (23) thereby extinguishing the Battery Drain Indicator (25).
3.5 Packing As unpacking, in the reverse order. Do not forget to secure the printing-
head assembly by inserting the latch at the left side of the rail into
the notch on the printing head.
Push the red "zeroize" button (23) to make sure that the Battery Drain
Indicator ( 25) is switched off and that all memories are reset.
The baseplate can be fixed to AROFLEX when the equipment is tilted
to one side, with the punch uppermost.
RESTRICTED
Advertisement
Table of Contents
