Table of Contents
Advertisement
R E S T R I C T E D
3 5
5.4 Operation with fast tape This technique is useful in the INDIRECT mode only, when several
punch only identical cryptograms are required, no taped clear message is available,
and a fast output is required.
1. Push the OFF-LINE, INDIRECT, and PROCEDURE buttons.
2. Carry out the crypto procedure and put in the clear text heading of
the message.
3. Push the ENCI button and put in the clear text after the indication
of the start of enciphering (//////////) has printed.
4. Release the PROCEDURE button after the clear text has been put
in completely.
5. Switch on the tape punch, wait till the "ready" signal lights up,
and push the OUTPUT button. The cryptogram is now punched
at the speed set by the switch on the adaptor. The output can be
repeated as many times as required. The cryptogram must not
exceed the maximum length of the transmission section.
RESTRICTED
Advertisement
Table of Contents
