Auto Stop Function - Kenwood CP-J7 Instruction Manual

Auto stop function
¢ During fast-forwarding or rewinding a tape
Proper headphone use
by pulling the cord as this could result in breakage.
Putting on the headphones
the left side,
Cleaning
Head cleaning
During use, the heads, capstan and pinch roller of the unit pick
up small particles and dust from the tape. If these particles are Pinch roller
permitted to accumulate, they can have a detrimental effect on
Pinch roller
Playback head
playback performance. It is therefore recommended that the
parts be kept clean at all times.
A cotton-tipped stick moistened in good-quality alcohol or
commercially-available head cleaning fluid ts best for this pur- oo
pose. When cleaning, be sure to press the STOP button before oe
wiping the heads, capstan and pinch roller of the unit. General-
ly, the heads and pinch roller should be cleaned at least once
for every 50 hours use, or twice a month.
he
via vit
* Clean the polarities of the rechargeable battery if they get dirty.
Cleaning the unit
When the cabinet or headphones become dirty, wipe then with a soit cloth moistened with a neu-
tral detergent. Do not use thinner, benzine or other solvents as these can damage the finish,
8 cp-J7