Panasonic ES2045 Operating Instructions Manual page 10

out epilation.
Ensure that the foam is firm
enough.
NOTE: If the foam is too soft, then
it will be difficult to catch the hair.
Increase the volume of liquid body
soap or reduce the volume of
water to make the foam firmer.
The foaming characteristics and
the firmness of foam will vary
depending on the characteristics
of the body soap used.
* Apply the epilator at right angles
to the skin and move it slowly.
NOTE: After the foam is applied it
is easy to move the epilator too
quickly. Take care to place the
head lightly against the skin and
move it slowly.
Dry epilation
* Remove the cap.
* Attach the head you wish to use.
* Slide the switch to 1 or 2 position
and carry out epilation.
* After completing epilation, slide the
switch to the O-charge position.
If you are concerned about pain
during epilation then please use the
1 position. However, bear in mind
that people sense pain differently
so in some cases you may feel
more pain on the 1 position.
The movement of the discs makes
some noise but this is perfectly
normal.
Please do not drop the appliance or
bang it against anything solid.
(This can cause the skin protector
or epilation discs to become
damaged, cracked or deformed.)
10
Correct usage for best epilation
results
* For the first use, or if not having
epilated for a long time, we
recommend trimming hairs before
epilation. Leg and arm hair should
be shortened to a length of 3 to 5
mm.
Apply epilator at right angles (90º)
against your skin. For best
epilation results keep in contact
with the skin surface. Pressing
gently and guide the appliance
slowly against hair growth. This
switch-side of the appliance
shows against hair growth. (Fig. 4)
Rub your skin to lift short hairs.
Move the epilator slowly on
the skin with the skin protector
vertically touching against it.
NOTE: You may drop some hair so
please lay out a piece of paper, etc.
to catch it for dry epilation.
Legs and arms epilation (Fig. 5)
When epilating legs or arms, please
use the epilation head.
Do not use this head on the underarm
or on the bikini line.
Important for arms and legs epilation:
Apply epilator at right angles (90º)
against your skin.
Pressing the appliance too hard onto
the skin or using it on an angle can
cause damage to the skin.
Press gently and guide the appliance
slowly against hair growth.
If you move the appliance too fast
then you will find a large number of
missed hairs.
* Holding the appliance correctly