Panasonic ES2045 Operating Instructions Manual page 13

a little water onto the discs to
create foam.
Wash the head with cold or warm
water to remove any hair. (Fig.7)
NOTE: Take care when doing so
as there is the possibility that
water may splash around.
Do not use hot water to wash the
appliance.
Use the supplied brush to remove
any hair that is still stuck to the
appliance.
If soap is not completely washed
away, then a white deposit can
accumulate and prevent the
blades from moving smoothly.
* Slide the switch to the O-charge
position and wipe the appliance
with a dry cloth.
NOTE: Do not apply pressure to
the skin protector.
Leaving the appliance wet for long
period of time can cause malodor.
* To prevent damage, always store
the leg/arm epilation and shaver
heads with their caps on.
Cleaning your epilator with
the supplied brush
Cleaning of the epilation head
(Fig. 8)
After using the appliance, always
clean the frame and discs to keep
them in a hygienic state.
* Remove the frame by holding
down the frame release button
and placing your fingers on the
tabs on the front and back of the
head.
Take care not to touch the skin
protector as it can easily become
13
deformed.
* Brush the epilation head.
While cleaning, you can turn the
epilation discs manually.
Be careful not to break the skin
protector when cleaning.
In some cases it is difficult to
remove hair that has become
stuck in the discs. In such cases,
hold the appliance so that it is
pointing down, rotate it a number
of times and then clean it again
with the brush. (Always ensure
that the switch is off before doing
SO.)
When removing the frame, please
do not touch the metal area on
the side of the disc. Touching
it can cause the appliance to
malfunction.
Please do not use any brush other
than the brush provided.
For disinfection of the epilation
discs please use only pure
alcohol.
Wipe the main body only with a
damp cloth. The use of alcohol
etc. may cause discoloration or
deformation of the main body.
Do not press down hard on the
skin protector.
After cleaning, put the protection
cap on the epilation head.
Cleaning of the shaver head
(Fig. 9)
After using the appliance, always
clean the blades to keep them in a
hygienic state.
* Remove the frame by lifting it from
one side while pressing on the
frame release button.