Siemens SIMATIC NET RUGGEDCOM RX1512 Equipment Manual page 34

4.
5.
Installing a Module
To install a line module, do the following:
1.
2.
3.
RUGGEDCOM RX1512
Equipment Manual, 10/2023, C79000-G8976-1057-25
Module
1
Chassis
2
Screw
3
Figure 4.2 Removing a Module
Install a new module or a blank module (to prevent the ingress of dust and dirt).
[Optional] If necessary, install the device in the rack.
[Optional] If the device is installed in a rack, remove it from the rack.
Remove the current module from the slot.
Insert the new module into the slot.
Module
1
4.3 Installing/Removing Line Modules
1
2
3
1
2
3
Modules
25