Table of Contents
Advertisement
Chapter 2 Preparations
1.6
Removing Top Cover
You need to remove top cover when installing or removing the following components or change internal cable
connection:
Internal flash memory,
Processor,
Extra battery for RAID controller, PCI card
Additional HDD cage,
1. Refer to steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove two screws from rear of the server.
3. Slide the top cover toward the rear of the server.
4. Lift off the top cover from the server.
Important
Before removing the top cover, be sure to disconnect cables from PCI card such as
LAN adapter. If not, cables may be damaged.
Express5800/R120d-1E User's Guide
TPM Kit
DIMM
Optical disk drive
1. Installing Internal Optional Devices
53
Advertisement
Table of Contents
