NEC R120d-1E N8100-1955F User Manual page 88

Chapter 2 Preparations
12. Install a RAID Controller to the riser
card.
When installing the card, position the
terminal part of the PCI card to the
riser card slot and insert it.
88
Important
•
When connecting FBU control cable to RAID Controller and FBU, be
sure to mate the black marks on FBU control cable connector and on
RAID Controller connector. If the cable is connected conversely, the
component might be damaged.
•
When installing RAID Controller, route the cable (e.g., FBU control
cable and internal SAS/SATA cables) so that they pass under the
support bar.
Support bar
Important
Do not touch the terminal part of riser cards or RAID Controller and the
signal pins of electric parts installed on the card. Installing cards with dirt or
oil can cause malfunction.
• Make sure that the head of RAID Controller bracket is seated into the fixed slot.
Note
• If you have trouble installing the RAID Controller, remove the card once and try
again. If you apply excessive pressure on the card, RAID Controller or riser card
might break.
Express5800/R120d-1E User's Guide
1. Installing Internal Optional Devices