Overview Of The Acceleration Mode - Toro Reelmaster 5510 Operator's Manual

Cruise Control (continued)
Indicates the cruise control
speed
Tips for Using the Cruise Control
• Set a cruising speed for long distances without many obstacles.
• On rough terrain, use the InfoCenter display to control the speed.
• Use the cruise control for turnarounds as follows:
1. While mowing, set a safe, comfortable speed for turning around at the end of mowing
passes.
2. Press the traction pedal to increase the speed for mowing during the mowing pass.
3. Take your foot off the pedal when turning around for the next mowing pass.
4. The machine will slow down to the low cruise control setting, allowing you to make an
efficient turnaround at a constant speed.
5. After turning around, use the traction pedal to increase the machine speed back up
for the next mowing pass.

Overview of the Acceleration Mode

This feature determines how quickly the machine changes traction speed when the traction
pedal is not in the N
Note:
If you take your foot off the traction pedal, allowing it to return to the N
while the machine is moving, the braking profile is engaged. The braking profile is always
the same and cannot be customized by the acceleration mode feature.
Enter the protected menus on the InfoCenter display to change the acceleration mode. The
acceleration mode has the following 3 positions:
• L —least aggressive acceleration and deceleration
OW
• M
EDIUM
• H —most aggressive acceleration and deceleration
IGH
Operation: During Operation
position.
EUTRAL
(default)—medium acceleration and deceleration
G462143s
Indicates the maximum
traction speed (pedal stop)
Page 5–16
This speed is locked out
under the protected PIN
menu.
position
EUTRAL
3464-490 A