Torquing The Wheel Nuts; Checking The Rear-Wheel Alignment - Toro Reelmaster 5510 Operator's Manual

Torquing the Wheel Nuts

Torque the wheel nuts to 94 to 122 N∙m (70 to 90 ft-lb) in a crossing pattern.
Failing to maintain proper torque of the wheel nuts could result in death or serious
injury.
Maintain proper torque of the wheel nuts.

Checking the Rear-Wheel Alignment

1. Rotate the steering wheel to position the rear wheels straight ahead.
2. Prepare the machine for maintenance.
3. At axle height, measure the center-to-center distance at the front and rear of the
steering tires.
Note:
wheel measurement and the rear wheel measurement is 6 mm (1/4 inch) or less.
Front of the traction unit
6 mm (1/4 inch) or less than the rear of the tire
4. If the measurement is greater than 6 mm (1/4 inch), adjust the rear wheel toe-in.
3464-490A
The rear wheel toe-in adjustment is correct if the difference between the front
WARNING
G416236
Center-to-center distance
Page 6–26 Maintenance: Drive System Maintenance