Sony DTC-87ES Operating Instructions Manual page 25

End ID
This signal indicates the end position of a
recording.
@ When you do not want to listen to the very end
of a tape, record the end ID at the beginning
of the portion you do not want to be played.
When the end ID is detected during playback,
the tape stops automatically.
When recording new material on a recorded
tape, you can write an end ID at the end of the
re-recorded portion. This will help you easily
find the position to start recording the next time
when you want to record other material onto the
same tape.
@ Selection Seerton {fern Selection | Blank
Recorded tape
End ID
During playback, the tape is automatically rewound to the
beginning.
When recording
new material onto
the same tape
a a 2
End ID
Portion where you have not made a second recording
(This first recording has not be erased.)
Absolute time
The absolute time indicates the position of the tape,
giving the time elapsed from the beginning. The absolute
time is recorded automatically at the same time the audio
signalis recorded. Itcannot be re-recorded. The absolute
time allows you to confirm the elapsed time from the
beginning of the tape, or search for the position of the
tape you want to listen to.
When using the sub codes
Things that can be done
Locating a selection (AMS function)
Program time
This is the time elapsed for a selection.
The date function (Recording a date)
With the built-in clock, the date and time of recording
are automatically recorded.
Required sub code(s)
Start ID
Listening to the first portion of selections sequentially
(Music Scan)
Start ID
Choosing a selection directly Start ID/Program number
Programming desired selections in a desired order
(RMS piay)
Start ID/Program number
Skipping the portion not desired
Knowing the correct elapsed time of playback
Starting the playback from the desired place
Skip ID/Start ID
Absolute time
Absolute time
Looking for the position at which the recording or
playback ends
End ID
Play a desired portion repeatedly (A-B repeat function)
Locating a selection by designating the time
(Time search function)
Absolute time |
Absolute time
Check the recording date and time
Date (It is recorded automatically.)
25