Sony DTC-87ES Operating Instructions Manual page 39

Latelale| usic Sensor Operati
m4 crear 4
= : =
= Sea 7 O M Ets) ©
"RMS = Random Music Sensor
The RMS function allows you to program the
desired selections in the desired order.
For the operation, program numbers must be written
on the tape.
This operation can be performed only with the
Remote Commander.
1 Designate the desired selection by pressing the
numeric button(s) during the stop mode.
The selection numbers can be specified from 0 to 99.
PGMNO, AMS
2 Press ENTER.
STEP RMS
! L 1 |
Indicates the playing order. | The RMS indicator lights
after programming the first
selection.
3 Repeat step 1 and 2.
A maximum of 60 selections can be programmed.
4 Press >.
The programmed selections are played back in the
designated order.
To stop RMS play
Press
To check the programmed selections
Press CHECK on the Remote Commander. Each time you
press CHECK, the programmed selections appear in the
designated order.
To add a selection to the program
Once the RMS play starts, you cannot add a selection. To
add a selection, first stop the RMS play, and program new
selection(s) by following the procedure described on the
left column.
To delete the selection you programmed last
Press CLEAR.
To cancel the entire program
In the stop mode: Press m™ once.
In the RMS play mode: Press @ twice.
39