Mitsubishi Electric AE-50A Instruction Book page 17

Item
Floor selection
Number of units whose filter
sign is turned on
*1
Number of units in error
*1 The item will not appear if the number of units is "0."
WT07139X02
If Floor Layout settings have been made on the AE-200/AE-50's LCD, preset floors are
available for selection. Select a floor you want to monitor.
Note: Floor Layout settings can be made only on the AE-200/AE-50's LCD. Refer to the
AE-200 Instruction Book for how to make Floor Layout settings and how to read floor
layout plans. If the floor layout is changed on the AE-200/AE-50's LCD, restart the
Web browser to update the floor layout.
Note: On a high-resolution display, the whole floor can be displayed by increasing the
browser display size.
Note: After clicking a group icon, the operation settings screen of the group will appear.
Scroll up to the left top of the screen to display the operation settings area.
The number of units under the control of AE-200/AE-50/EW-50 whose filter sign is currently
turned on will appear. Clicking "
4-4.)
Note: This item will not appear if the [Filter Sign Display] is set to [OFF] on the Basic System
settings screen, accessible via the Web Browser for Initial Settings.
The number of units under the control of AE-200/AE-50/EW-50 that are currently in error
will appear.
*1
Clicking " " will bring up the Malfunction List screen. (See section 4-3.)
Description
" will bring up the Filter Sign List screen. (See section
17
The font color (black or
white) of the group names
can be switched.