Checking The Operation Conditions Of Hwhp (Cahv, Crhv) Unit Groups - Mitsubishi Electric AE-50A Instruction Book

Item
Number of units whose filter
sign is turned on *1
Number of units in error
*1 The item will not appear if the number of units is "0."

4-1-3. Checking the operation conditions of HWHP (CAHV, CRHV) unit groups

On the Condition List screen, click the [HWHP] button to display the operation conditions of the HWHP (CAHV,
CRHV) unit groups.
Note: The [HWHP] button will not appear if no HWHP (CAHV, CRHV) units have been registered to any group.
Update
Click to show the most
recent operation conditions.
Group name
HWHP (CAHV, CRHV) unit
group icons
The icons indicate the
operation conditions of
groups.
Click the icon to switch to
the operation screen.
Operation mode
Set temperature
Item
Block/Overview (Floor
Layout)/HWHP
Update
Batch Operations
HWHP (CAHV, CRHV) unit
group icons
Group name
Operation mode
Set temperature
Temperature
Fan mode
WT07139X02
The number of units under the control of AE-200/AE-50/EW-50 whose filter sign is
currently turned on will appear. Clicking "
section 4-4.)
Note: This item will not appear if the [Filter Sign Display] is set to [OFF] on the Basic
System settings screen, accessible via the Web Browser for Initial Settings.
The number of units under the control of AE-200/AE-50/EW-50 that are currently in error
*1
will appear. Clicking "
Click [Block] to display the operation conditions of groups per block, click [Overview (Floor
Layout)] to display the operation conditions of all groups, and click [HWHP] to display the
operation conditions of HWHP (CAHV, CRHV) unit groups.
Click to show the most recent operation conditions.
When [Auto] is selected, the operation conditions are updated automatically every minute.
Click to operate the units in all HWHP (CAHV, CRHV) unit groups at once.
Each group icon indicates the operation condition of the group. Clicking the icon will bring
up the operation screen.
The name of the group will appear.
The operation mode of the group will appear.
The set temperature of the group will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
The representative water temperature, outdoor temperature, brine temperature, inlet
water temperature, and outlet water temperature will appear.
Note: When there is a communication error, the temperature value will be "--."
Note: The brine temperature will not appear for HWHP (CAHV) unit groups.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
The fan mode of the group will appear. (CAHV model only)
Description
" will bring up the Filter Sign List screen. (See
" will bring up the Malfunction List screen. (See section 4-3.)
Description
21
Batch Operations
Click to operate the units in
all HWHP (CAHV, CRHV)
unit groups at once.
Block/Overview (Floor
Layout)/HWHP
Weekly schedule number
Indicates the weekly
schedule that is currently
effective.
Fan mode
Temperature