Peakcut Control Status - Mitsubishi Electric AE-50A Instruction Book

5-4. Peakcut Control Status

This section explains how to check the Peakcut control status.
Click [Energy Management] in the menu bar, and then click [Peakcut Control Status] to access the Peakcut
Control Status screen.
The average electric power consumption (kW) and the control level will appear in the graph. The measurement
data can be exported in a CSV format from the screen.
Measurement date
Update
Click to show the most
recent measurement data.
Average electric power
Download
Click to export the data in
the CSV format.
Item
Update
Measurement date
Average electric power
Control level
Download
WT07139X02
Click to show the most recent measurement data.
Select the measurement date.
Note: The data of the past three days including the current day can be displayed.
Average electric power consumption (kW) will appear in 30-minute increments.
Note: Average electric power consumption data are stored every hour and half hour. If a power
failure occurs, up to 30-minute worth of data will be lost.
Note: The graph can be displayed only when the Peak Cut method is set to [Electric Amount Count
PLC] or [PI Controller] on the Peak Cut settings screen, accessible via the Web Browser for
Initial Settings.
Peak Cut control level will appear.
Click [Download] to export the measurement data in the CSV format as shown below.
■ File name
Peakcut_[yyyy]-[mm]-[dd].csv
File-name contents
[yyyy]
[mm]
[dd]
Description
The year specified in the [Measurement date] field
The month specified in the [Measurement date] field
The date specified in the [Measurement date] field
45
Control level
Format