Siemens SINUMERIK 840D sl Equipment Manual page 112

Connecting
7.4 Connecting cable
Improper installation of the cable can result in failure of the safety functions.
Please observe the following before you reattach the cover:
• Check to ensure that all of the conductors are aligned and straight and check the firm
• Make sure that the connecting cable sleeve is installed correctly.
112
WARNING
seating of the plug connector.
2. Insert the connecting cable in the appropriate
entry (left or right).
Press the cable downward slightly until it rests
completely on the fastening lugs
Insert a plug in the cable entry that you do not
intend to use.
3. Press the plug connector firmly into the power
supply socket.
4. Connect the RJ-45 connector to the Ethernet
socket.
Equipment Manual, 02/2024, A5E52918633B AA
Handheld Terminal HT 8