Configuring Nec Sv8100 Ip-Pbx; Basic Configuration Parameters - NEC SV8100 Configuration Note

Ip-pbx

Hide thumbs Also See for SV8100:

Table of Contents

Configuration Note

Configuring NEC SV8100 IP-PBX

This chapter describes how to configure the basic parameters of the NEC SV8100 PBX to

operate with AudioCodes E-SBC.

Note:

For more complicated configuration parameters please refer to the User Manual

of each IP-PBX.

3.1

The screenshots below show the main parameters, which should be configured on the

NEC SV8100 IP-PBX in order to operate with the AudioCodes Mediant E-SBC. Standard

Trunk routing or ARS/F-Route can be used to select the SIP trunks for outgoing calls.

DID/DDI Routing is used for incoming calls.



To configure NEC IP-PBX:

Connect to the NEC IP PBX using the PC Pro Configuration tool and download the

current configuration.

Figure 3-1: Blade Configuration of NEC SV8100 Viewed in PC Pro

Note:

Save your current configuration file before proceeding.

Version 7.0

3. Configuring NEC SV8100 IP-PBX

AudioCodes Mediant E-SBC

Table of Contents