NEC SV8100 Configuration Note page 58

5. Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to forward messages sent to the BroadCloud SIP Trunk IP Group
with the '00' prefix and the IP-PBX IP address in the Contact initiated by the IP-PBX.
This removes the '00'.
Index
Name
Manipulation Set ID
Message Type
Condition
Action Subject
Action Type
Action Value
Figure 4-34: Configuring SIP Message Manipulation Rule 3 (for BroadCloud SIP Trunk)
AudioCodes Mediant E-SBC
Parameter
58
NEC SV8100 IP-PBX & BroadCloud SIP Trunk
Value
3
Call FW change Contact
4
invite.response.302
header.Contact regex
(.*)(sip:00)(.*)(@)(192.168.100.5)(.*)
header.Contact
Modify
$1+'sip:'+$3+$4+'interop.adpt-tech.com'+$6
Document #: LTRT-12530