Step 1A: Configure Vlans - NEC SV8100 Configuration Note
Ip-pbx
Hide thumbs
Also See for SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Configuration Note
4.1.1
Step 1a: Configure VLANs
This step describes how to define VLANs for each of the following interfaces:
LAN VoIP (assigned the name "Voice")
WAN VoIP (assigned the name "WANSP")
To configure the VLANs:
1.
Open the Ethernet Device Table page (Configuration tab > VoIP menu > Network >
Ethernet Device Table).
2.
There will be one existing row for VLAN ID 1 and underlying interface GROUP_1.
3.
Add another VLAN ID 2 for the WAN side as follows:
Index
VLAN ID
Underlying Interface
Name
Tagging
Figure 4-2: Configured VLAN IDs in Ethernet Device Table
Version 7.0
Parameter
23
4. Configuring AudioCodes E-SBC
Value
1
2
GROUP_2 (Ethernet port group)
vlan 2
Untagged
AudioCodes Mediant E-SBC
Advertisement
Table of Contents
