Step 3: Configure Media Realms - NEC SV8100 Configuration Note

Configuration Note
4.3

Step 3: Configure Media Realms

This step describes how to configure Media Realms. The simplest configuration is to create
two Media Realms - one for internal (LAN) traffic and one for external (WAN) traffic.

To configure Media Realms:
1. Open the Media Realm Table page (Configuration tab > VoIP menu > VoIP Network
> Media Realm Table).
2. Add a Media Realm for the LAN interface. You can use the default Media Realm
(Index 0), but modify it as shown below:
Index
Media Realm Name
IPv4 Interface Name
Port Range Start
Number of Media Session Legs 100 (media sessions assigned with port range)
Version 7.0
Parameter
Figure 4-5: Configuring Media Realm for LAN
4. Configuring AudioCodes E-SBC
0
MRLan (descriptive name)
Voice
6000 (as required by IP-PBX)
27
Value
AudioCodes Mediant E-SBC