(
DRAWER MOUNT
CASE
DRAWER OPEN
MSU9101 OR
MSU9102.
DRAWER CLOSED
Figure 2-1
Mass Storage Unit Cabinet with Expansion Drawer
3.
4.
From rear of drawer, locate rear deck holddown screw
(i.e., center of three screws at rear deck casting) and
associated spacer (red tag attached)
(see Figure 2-3).
Remove rear deck holddown Screw and spacer and store
them in threaded keeper hole at rear of deck casting.
Discard red tag and string.
From right-hand side of drawer, locate shock-lock bracket
(red tag attached) near front of drawer (see Figure
2-4).
Loosen bottom screw and remove top screw.
Pivot
L-shaped shock-lock bracket 90 degrees to right and
fasten bottom screw securely.
Place top screw back into
original tapped hole and fasten it securely.
Discard
red tag and string.
2-3
HONEYWELL CONFIDENTIAL & PROPRIETARY