Table of Contents
Advertisement
(-
(
Table 2-2
Expansion Drawer Assembly Parts List
INDEX
PART
NO.
NUMBER
PART DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
11
12
13
14
15
16
10126402
10125106
10125606
10127143
10126244
10126105
76428100
76428658
77562758
94393001
94393000
76422600
10125746
10127122
FRAME ASSEMBLY
WASHER, Lock, External Tooth, 8
NUT, Hex, 8-32
WASHER, Flat, 8
SCREW, Machine, Pan Head, 10-32 x 1/2
SCREW, Socket, Hex Head, 10-32 x 3/8
WASHER, Lock, Internal Tooth, 10
KEEPER, La tch
PANEL, Front, Upper
PANEL, Front, Lower
SLIDE
SLIDE (Not Shown)
PLATE, Nut
WASHER, Special
SCREW, Flat Head, 10-32 x 3/8
SCREW, Machine, Pan Head, 8-32 x 3/8
CABLE, Ground
2.2.2.5
Installation of Latch Keepers
The installation of the latch keepers is as follows:
1.
Locate latch keepers (Table 2-2, item 8) within supplied
hardware.
2.
From front of cabinet, loosely install a latch keeper on
right-hand and left-handed sides of cabinet frame as
shown in Figure 2-9, using hardware supplied (Table 2-2,
item 8, and two sets of items 5 and 7) •
2.2.2.6
Installation of Lower Front Panel
The installation of the lower front panel is as follows:
1.
Locate lower front panel supplied with shipment of expan-
sion drawer (see Table 2-2, item 10, and Figure 2-9).
2.
Locate ground stud inside lower front panel and install
same ground cable quick-disconnect hardware that was on
front door assembly in subsection 2.2.2.1, step 5.
3.
From front of cabinet, place lower front panel at base of
cabinet with ground stud to left and air circulating cut-
out facing up and loosely fasten panel to cabinet frame
using supplied hardware (Table 2-2, item 10, and four
sets of items 2, 4, and 15), as shown in Figure 2-9.
4.
Connect lower front panel ground cable to cabinet cable
quick-disconnect.
2-19
HONEYWELL CONFIDENTIAL
&
PROPRIETARY
Advertisement
Table of Contents
