Sharp VC-A105B Operation Manual page 9

Available languages

Channel Skip

If there are channel positions that are not preset, you can skip them by the

following procedure.

Select the video channel on your TV. Press the OPERATE

button on the

VCR to ON. Ensure the BAND SELECTOR is set to NORMAL.

@ Select

the

position

number

whose channel you want to skip

using

the

CHANNEL

up/down

buttons.

Select position number 35.

or UHF.

"CH" will start flashing.

Press the CLEAR button on the remote control. The channel position num-

ber starts flashing.

@ Switch

the

BAND

SELECTOR

back to NORMAL.

Cancelling Channel Skip:

@ Select the video channel on your TV. Press the OPERATE button on the

VCR to ON.

@ Set the BAND SELECTOR to VHF or UHF.

"CH" and the channel position number start flashing.

CHANNEL up/down buttons.

Select position number 35.

Press the CLEAR button on the remote control. The channel position num-

net wl remain lit. Repeat step @ through @ for recalling other skipped

channels.

@ Switch the BAND SELECTOR back to NORMAL.

"CH" remains lit.