Dell PowerConnect 3024 User Manual page 10

Back to Contents Page
Web Interface
Dell™ PowerConnect™ 3024 Systems User's Guide
Web Pages
Home
System Manager
Port Manager
Address Manager
Spanning Tree
VLAN & CoS
With web-based management, you can configure the PowerConnect 3024 Fast Ethernet Managed Switch and monitor the system using a web browser.
Most web pages for the switch feature the following buttons:
Reload — Displays the current values for the system related to the web page that is open.
l
Apply — Makes changes to the system and refreshes the page. These changes do not persist past the current session.
l
NOTICE: For changes to persist beyond the current session, you must save the new configuration from the Save Configuration page.
Add — Adds new entries to the system and refreshes the page.
l
Remove — Removes selected entries from the system and refreshes the page.
l
Web Pages
When you connect to the management mode of the switch with a web browser, a login screen is displayed (if password protection has been enabled). The
user name is always root. Enter the password to access the switch's management mode.
NOTE: The default password is switch.
You can manage a stack of up to six units through the web interface. On most pages, you must select the unit in the stack you want to see in the web
interface. Where space permits, all six units of the stack are displayed, but only those units that are actually present in the stack are active; the units not used
are grayed out.
The following menus are available from the web interface:
Home
l
System Manager
l
Port Manager
l
Address Manager
l
Spanning Tree
l
VLAN and CoS
l
Port Trunking
l
Port Mirroring
l
SNMP
l
Multimedia Support
l
Statistics
l
Save Configuration
l
Home
The Home page describes the dynamic switch applet.
NOTE: If the system is used in a stack configuration, the arrow keys on the left side of the applet allow you to select a unit in the stack. The dynamic
applet will display the status for the selected unit.
Port Trunking
Port Mirroring
SNMP
Multimedia Support
Statistics
Save Configuration