3. Use the appropriate network cabling to connect a device to the connectors on the GBIC module.
4. Enable the GBIC port in the web or console management interface by performing the following steps:
Web interface:
Select Port Manager, then select GBIC.
¡
To enable the GBIC module, select GBIC for the desired port.
¡
Console interface
Select Port Manager.
¡
Place the cursor over the desired port number and press the spacebar to enable the GBIC module.
¡
NOTICE:
Enabling the GBIC port disables the associated built-in 10/100/1000BASE-T port.
Back to Contents Page