Spanning Tree
The Spanning Tree screen includes the following options:
Bridge Settings
l
Port Settings
l
Bridge Settings
From the Bridge Settings screen, you can enable and configure the spanning tree. The following options are available:
Enable — turns the spanning tree on. If you enable the spanning tree, you must complete the following fields:
l
Hello Time — sets the interval between configuration messages sent by the spanning tree protocol.
¡
Max Age — sets the amount of time before the system discards a configuration message.
¡
Forward Delay — sets the amount of time the system spends in learning and listening states.
¡
Bridge Priority — sets the priority setting among other switches in the spanning tree.
¡
Disable — disables the spanning tree protocol on the system.
l