Sony ULT WEAR Quick Start Manual page 105

4.
On the [Set up Alexa on your ULT WEAR] screen, touch [CONTINUE].
If the [This will override the current voice assistant on this accessory] screen appears, touch [CONTINUE].
5.
On the [Setup Complete] screen, touch [DONE].
When the initial settings are complete, the function of the touch sensor control panel is changed to Amazon Alexa.
Hint
Check or update the software version of the headset with the "Sony | Headphones Connect" app.
When Amazon Alexa is not available for reasons such as not being connected to the network, the voice guidance "Either your
mobile device isn't connected; or you need to open the Alexa App and try again" is heard.
When you set up the headset to Amazon Alexa, the function of the touch sensor control panel is changed to Amazon Alexa. To
change the function of the touch sensor control panel, change it with the "Sony | Headphones Connect" app.
Similarly, you can reconfigure the touch sensor control panel back to Amazon Alexa if you have previously connected to Amazon
Alexa, but have changed the function to another one.
It is possible not to assign the voice assistant to the touch sensor control panel.
Note
If the function of the touch sensor control panel is set as Amazon Alexa, the voice assist function (Google app) cannot be used.
If the function of the touch sensor control panel is set as Amazon Alexa, the voice assist function (Siri) cannot be used.
If the function of the touch sensor control panel is set as Amazon Alexa, Google Assistant cannot be used from the headset.
Amazon Alexa is not available in all languages and countries/regions. Alexa features and functionality may vary by location.
For details on the services provided by other companies such as Google Assistant or Amazon Alexa, consult each service
provider directly.
Sony shall assume no responsibility for any problems such as misunderstandings related to the services provided by other
companies.
5-055-975-11(1) Copyright 2024 Sony Corporation
105