Sony ULT WEAR Quick Start Manual page 54

Wireless noise canceling stereo headset

Table of Contents

Hint

The operation above is an example. For more details, refer to the operating instructions supplied with the computer.

To delete all Bluetooth pairing information, see

Note

If pairing is not established within 5 minutes, pairing mode is canceled. In this case, turn off the power and start the operation

again from step 1.

Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:

Pairing information has been deleted after repair, etc.

When a 9th device is paired

The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration

information of the paired device with the oldest connection date is overwritten with the information for the new device.

When the pairing information for the headset has been deleted from the connected Bluetooth device

When the headset is initialized

All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected

device and then pair them again.

The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.

Yy2981