Sony ULT WEAR Quick Start Manual page 34

3
Touch the switch to turn on the Bluetooth function.
4
Touch [ULT WEAR].
5
*
If Passkey input is required, input "0000".
The headset and smartphone are paired and connected with each other.
You will hear a notification sound indicating that the connection is established.
If they are not connected, see
If [ULT WEAR] does not appear on your Android smartphone screen, try again from step 3.
* A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
To delete all Bluetooth pairing information, see
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, turn off the power and start the operation
again from step 1.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
information of the paired device with the oldest connection date is overwritten with the information for the new device.
When the pairing information for the headset has been deleted from the connected Bluetooth device
When the headset is initialized
All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected
device and then pair them again.
"Connecting to a paired Android
"Initializing the headset to restore factory
34
smartphone".
settings".