Sony ULT WEAR Quick Start Manual page 136

Wireless noise canceling stereo headset

Table of Contents

Help Guide

Wireless Noise Canceling Stereo Headset

ULT WEAR

Cannot hear the other person or the call volume is low during calls/The other person

cannot hear you or their call volume is low during calls.

Check that both the headset and the connected device are turned on.

Turn up the volume of the connected device and the volume of the headset if they are too low.

When you use the video calling application, open the settings

speaker or microphone setting is specified as [Headset (ULT WEAR Hands-Free)]

calling application cannot be checked or calling connections [Headset (ULT WEAR Hands-Free)] cannot be selected,

select [Headset (ULT WEAR Hands-Free)] on the settings of your computer to make connections.

Depending on the video calling application you are using, this function may not be available.

Names may vary according to the computer or the video calling application you are using.

Operate the Bluetooth device to re-establish the connection. Select HFP or HSP for the profile.

If you are listening to music with the headset, stop playback and tap the touch sensor control panel twice quickly (with

an interval of about 0.4 seconds) to respond to an incoming call.

Reset the headset.

Initialize the headset, and pair the headset with the device again.

Yy2981