Specifications; General Description - Panasonic KX-TDA100 Installation Manual

1.4

Specifications

1.4.1

General Description

Control Bus
Communication Bus
Switching
Power Input
External Battery
Maximum Power Failure Tolerance
Memory Backup Duration
Dialling
Mode Conversion
Ring Frequency
Trunk Loop Limit
Operating
Environment
Conference Call Trunk
Music on Hold (MOH)
Paging
Serial Interface Port
PSU-S
PSU-M
PSU-L
Trunk
Extension
Temperature
Humidity
Internal
External
RS-232C
USB
Original bus (16-bit, 8 MHz, 10 megabytes per second)
H.100 bus conformity (1024 time slot)
Non-blocking
100 V AC to 130 V AC, 1.4 A/200 V AC to 240 V AC, 0.8 A,
50 Hz/60 Hz
100 V AC to 130 V AC, 2.5 A/200 V AC to 240 V AC, 1.4 A,
50 Hz/60 Hz
100 V AC to 130 V AC, 5.1 A/200 V AC to 240 V AC, 2.55 A,
50 Hz/60 Hz
+36 V DC (+12 V DC × 3, battery capacity of 28 Ah or below
recommended for each external battery)
300 ms (without using backup batteries)
7 years
Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
DP-DTMF, DTMF-DP
20 Hz/25 Hz (selectable)
1600 Ω maximum
0 °C to 40 °C
10 % to 90 % (non-condensing)
From 10 × 3-party conference call to 4 × 8-party conference
call
2 ports (Level Control: -11 dB to +11 dB in 1 dB steps)
MOH1: External Music Source port
MOH2: Selectable Internal/External Music Source port
Level Control: -15 dB to +6 dB in 3 dB steps
2 ports (Volume Control: -15 dB to +15 dB in 1 dB steps)
1 (maximum 115.2 kbps)
1
1.4 Specifications
Installation Manual 27