Battery Indicators - Motorola 388 User Manual

Battery Indicators

Insert battery: the display will prompt you to insert the battery if you
have connected the phone to an external current mains
before inserting the battery.
Invalid battery:
This is to warn you that the battery cannot be re-charged
(though the battery can provide power to the phone).
This may indicate that the battery is not Motorola
Original Accessory Battery. It is suggested that you use
only Motorola Original Batteries and other accessories as
Motorola will not be held responsible for any damage to
the phone, financial loss or bodily injuries arising from
the use of non-Motorola original batteries and
accessories.
Travel charger can charge your battery with the phone, or it will supply
power to the power for operation. The way to charge the battery is as
follow:
1 Make sure that the battery is attached to the phone.
2 Connect the phone connector side of the travel charger to your phone
power socket.
3 Connect the AC power connector side of the travel charger to your
AC power supply.
! Please make sure that the travel charger voltage is compatible to your
local AC Power supply voltage. And please make sure that you are using
the local standard recommended AC plug.
4 Once the charging starts, there will be a 'beep' sound. You can charge
the battery under when the phone is powered on or off. There will not
be any influence on operation when charging with the phone powered
on.
When the phone is powered off and being charged, phone will display
A
"Battery Charging" with the flip opens. The battery (Battery icon with no
level) or (battery icon with one level) or (battery icon with 2 levels) will
flash on the upper right hand corner to show the battery is being
charged. When the flip is closed, "Batt Charging" will show through the
Open Window Display.
22 Getting Started
this display will be accompanied by a warning beep.