4
Enter the following command, then press the [ENTER] key on
your keyboard.
get config <File Name>
The config file is downloaded. The letters entered for <File Name> become the
name of the downloaded config file.
IMPORTANT
For Windows 98/Me, do not enter "config" for <File Name>.
NOTE
•
When upgrading the firmware, enter "put <the update file of the firmware> FLASH",
then press the [ENTER] key on your keyboard. For details on the update file of the
firmware, see "Updating the Firmware," on p. 5-21.
•
You can obtain the default value of the network board by entering "get defaults" and
pressing the [ENTER] key on your key board to download the list of the default
value of the network board.
•
The download directory for the config file varies depending on the operating
system or settings. If you cannot find the config file, browse the config file using the
file browse function of the operating system.
5
Using Notepad, etc., edit downloaded the config file.
For details on descriptions of each option, see "Network Setting Items," on p. 5-2.
6
Enter the following command, then press the [ENTER] key on
your keyboard.
put <File Name> CONFIG
NOTE
In <File Name>, enter the name of the config file that was entered when the file
was downloaded.
7
Enter the following command, then press the [ENTER] key on
your keyboard to reset the network board.
get reset
After completing the reset of the network board, the settings are effective.
NOTE
The settings also become effective by restarting the printer (Turn OFF the printer
once, wait for 10 seconds or longer, and then turn it ON).
Managing the Printer Using FTP Client
3
3-43