Canon LBP-3300 Network Manual page 93

NOTE
You can log in by entering a name other than "root" (or leaving the field blank). In
this case, you can perform operations other than settings.
4
Enter the following command, then press the [ENTER] key on
your keyboard.
get config <File Name>
The config file is downloaded. The letters entered for <File Name> become the
name of the downloaded config file.
IMPORTANT
For Windows 98/Me, do not enter "config" for <File Name>.
NOTE
The download directory for the config file varies depending on the operating
system or settings. If you cannot find the config file, browse the config file using the
file browse function of the operating system.
5
Using Notepad, etc., edit the downloaded config file.
For details on descriptions of each option, see "Network Setting Items," on p. 5-2.
6
Enter the following command, then press the [ENTER] key on
your keyboard.
put <File Name> CONFIG
NOTE
In <File Name>, enter the name of the config file that was entered when the file
was downloaded.
7
Enter the following command, then press the [ENTER] key on
your keyboard to reset the network board.
get reset
After completing the reset of the network board, the settings are effective.
NOTE
The settings also become effective by restarting the printer (Turn OFF the printer
once, wait for 10 seconds or longer, and then turn it ON).
Protocol Settings for the Printer
2
2-75