5
Specify [IP Address], [Subnet Mask], and [Gateway Address].
Enter the IP address of the printer in [IP Address]. Enter the addresses used in
the TCP/IP network in [Subnet Mask] and [Gateway Address].
NOTE
•
Even if you are using any one of DHCP, BOOTP, or RARP, specify [IP Address],
[Subnet Mask], and [Gateway Address]. If you cannot obtain information from the
servers of DHCP, BOOTP, and RARP, the values specified here are used.
•
If you specify to use any one of DHCP, BOOTP, or RARP, the values obtained from
those are displayed after resetting the network board (If the values have been
specified previously, they overwrite the obtained ones).
Protocol Settings for the Printer
2
2-63