Using Quick Internet Connection/Disconnection; Configuring A Backup Internet Connection - D-Link NetDefend DFL-CP310 User Manual

Using Quick Internet Connection/Disconnection

Using Quick Internet Connection/Disconnection

ng the Connect or Disconnect button (depending on the connection status)
By clicki
on the In ternet page, you can establish a quick Intern
currently selected connection type. In
active connectio n.
The Internet connection retains its Connected/Not Connected status until the
NetDefend fire wall is rebooted. The NetDefend firewall then connects to the
Internet if the connection is enabled. For information on enabling an Internet
co nnection, see Enabling/Disabling the Internet Connection on page 88.

Configuring a Backup Internet Connection

You can configure both a prim
sec ondary connection acts as a backup, so that if the primary connection fai
NetD efend firewall remains connected to the Internet.
Note: You can configure different DNS servers for the primary and seco
connections. The NetDefend firewall acts as a DNS relay and ro
computers within the network to the appropriate DNS server for the active
connection.
90
the same manner, you can term
ary and a secondary Internet connection. The
et connection using the
inate the
ndary
utes requests from
Internet
D-Link NetDefend firewall User Guide
ls, the