Before You Install the NetDefend firewall
4. Click the IP Address
button.
Note: Normally, it is not recommended to assign a static IP
address to your PC but rather to obtain an IP address
automatically. If for some reason you need to assign a static IP
address, select Specify an IP address, type in an IP address in the
range of 192.168.10.129-254, enter 255.255.255.0 in the
Subnet Mask field, and click OK to save the new settings.
(Note that 192.168.10 is the default value, and it may vary if you
changed it in the My Network page.)
5. Click Yes when p
Your computer restarts, and the new
Your computer is now ready to access your NetDefend firewall.
M
ac OS
Use the following pro
26
tab, and click the Obtain an IP address automatically radio
rompted for "Do you want to restart your computer?".
cedure for setting up the TCP/IP Protocol.
settings to take effect.
D-Link NetDefend firewall User Guide