Viewing Ike Traces For Vpn Connections - D-Link NetDefend DFL-CP310 User Manual

Viewing IKE Traces for VPN Connections

This icon... Represents...
A network for which an IKE Phase-2 tunnel was negotiated
A Remote Access VPN Server
A Site-to-Site VPN Gateway
A remote access VPN user

Viewing IKE Traces for VPN Connections

If you are experiencing VPN connection problems, you can save a trace of IKE
(Inter net Key Exchange) negotiations to a file, and then
to view the file.
The IKE View tool is available for the Windows platform.
Note: Before viewing IKE traces, it is recommended to do the following:
•
The NetDefend firewall stores traces for all recent IKE negotiations. If
you want to view only new IKE trace data, clear all IKE trace data
currently stored on the NetDefend firewall.
•
Close all existing VPN tunnels except for the problematic tunnel, so as
to make it easier to locate the problematic tunnel's IKE negotiation
trace in the exported file.
To clear all currently stored IKE traces
1. Click Reports in the main menu, and click the VPN Tunnels tab.
The VPN Tunnels page appears with a table of open tunnels to VPN sites.
2. Click Clear IKE Trace.
All IKE trace data currently stored on the NetDefend firewall is cleared.
356
use the free IKE View tool
D-Link NetDefend firewall User Guide