Fujitsu ScanSnap S300 Operator's Manual page 16

WARNING
The following describes important warnings described in this manual.
Do not touch the Power cables with wet hands.
Do not damage the Power cables.
Use only specified Power and interface cables.
Use this scanner only at the indicated power voltage. Do not
connect to multiple-power strips.
Wipe any dust from the power plug or USB bus power cable.
xiv
Do not touch the power plug or USB bus power cable with wet hands. Doing so
might cause electric shock.
A damaged power cable or USB bus power cable may cause fire or electric
shock.
Do not place heavy objects on the power or USB bus power cable, or pull, bend,
twist, heat, damage or modify the cable.
Do not use damaged power or USB bus power cables or power plugs. Do not
use the power cable when the wall socket is loose.
Use only the specified Power, USB bus power, and interface cables. Failure to
use the correct cables might cause electric shock and equipment failure.
Use this scanner only at the indicated power voltage and current. Improper
power voltage and current might cause fire or electric shock.
Also, do not connect to multiple-power strips.
Wipe off any dust from the metal part and its surrounding section on the power
plug and those the USB bus power cable with a soft, dry cloth. Accumulated dust
might cause fire or electric shock.