Right-Click Menu; Changing Scanning Settings; Saving Scanning Settings - Fujitsu ScanSnap S300 Operator's Manual

■ Right-Click Menu

This menu appears when the ScanSnap Manager icon
In this menu, you can perform the following:
Item
Duplex scan
Simplex scan
SCAN Button Settings
Use Quick Menu
Profile Management
Show scanning results
Check consumable
supplies
Help
Exit
S
S
Both the front and back sides of the document are scanned at the
same time. Scanning is performed according to the settings
configured in the [ScanSnap Manager - Scan and Save Settings]
dialog box.
Only one side of the document is scanned at one time. Scanning
is performed according to the SCAN Button Settings.
The [ScanSnap Manager - Scan and Save Settings] dialog box
appears.
Settings configured in this dialog are used when scanning is
performed with a [SCAN] button
⇒
Refer to "4.2 Changing Scanning Settings" (page
You can switch between the Quick Menu Mode and Left-Click
Menu Mode by marking/clearing this.
You can select an operational mode that is enabled upon
scanning with a [SCAN] button
⇒
Refer to "3.1 Flow of Operations" (page
The [Profile Management] dialog box appears.
You can edit profiles.
⇒
Refer to "4.3 Saving Scanning Settings" (page
A message appears after scanning to inform you of the scanning
results, whether blank pages are removed
orientation is changed (page
The [Check consumable status] dialog box appears.
Reset consumable counters to 0 after you replace consumables.
Refer to "9.1 Replacing Consumables" (page
You can view the Help topics, the version information of
ScanSnap Manager, and the [Preferences]
Update] (page 201) dialog boxes.
You can exit ScanSnap Manager.
ScanSnap S300 Operator's Guide
4.1 About the ScanSnap Icon
is right-clicked.
Function
press.
47).
press.
22).
70).
(page 60) and/or the
61).
190).
(page 86) and [Online
4
45