Fujitsu ScanSnap S300 Operator's Manual page 53

4. Press the [SCAN] button
⇒
Scanning is started.
•
By default, documents are scanned in Duplex mode when you press the
HINT
[SCAN] button. In the [ScanSnap Manager - Scan and Save Settings] dialog
box, you can switch the scanning mode of the [SCAN] button to Simplex
mode.
•
Scanning can also be started by using the ScanSnap Manager icon
the taskbar.
For details about this operation, refer to section
Icon" (page
•
Do not connect or disconnect other USB devices during the scanning
ATTENTION
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation. Otherwise, the
scanning is canceled.
⇒
The power indicator (lamp)
The following window appears to indicate the scanning status.
on the ScanSnap.
44).
on the ScanSnap blinks blue during the scanning operation.
ScanSnap S300 Operator's Guide
3.1 Flow of Operations
on
S S
"4.1 About the ScanSnap
3
33