Pioneer PDP-433CMX Technical Manual page 158

Integrator Mode
(#: applies only when equipped with PDA-5002)
1 AUDIO INPUT
(INPUT1/2/5)
....Stereo mini jack
2 AUDIO INPUT
(INPUT3) #....Pin jack
3 AUDIO INPUT
(INPUT4) #....Pin jack
This unit is equipped with 3 audio input systems.
<PDP-503CMX/PDP-503MXE and PDP-433CMX/PDP-433MXE>
1 AUDIO INPUT (INPUT1, 2 and 5): Stereo mini jack
= Is selected in common when PICTURE INPUT 1, 2 or 5 has been selected.
<PDA-5002>
2 AUDIO INPUT (INPUT3): Pin jack
= Is selected when PICTURE INPUT 3 has been selected.
3 AUDIO INPUT (INPUT4): Pin jack
= Is selected when PICTURE INPUT 4 has been selected.
Use of SUB VOLUME: Example 1
When a personal computer is connected to INPUT 1 (picture input only) and a DVD player has been connected to
INPUT2 (pictures and sound):
= Will reproduce the DVD player's sound when PICTURE INPUT 1 or 2 has been selected.
When sound is not necessary with personal computer input (INPUT 1), set the SUB VOLUME for INPUT 1 to 0.
Use of SUB VOLUME: Example 2
When a DVD player is connected to INPUT 3 (pictures and sound) and a personal computer to INPUT 5 (pictures and
sound):
= When the difference in volume between the DVD player and personal computer is distracting, adjust SUB VOLUME
for whichever source is louder.
158
INPUT1
SUB VOLUME
INPUT2
INPUT
SUB VOLUME
SELECTOR
INPUT5
SUB VOLUME
INPUT3
SUB VOLUME
INPUT4
SUB VOLUME
POWER
AMPLIFIER
VOLUME
Audio block diagram
(conceptual diagram)