Figure 16-14. Removing and Installing the Control Panel-PowerVault MD3620f
1
2
1
release pin
Installing the Control Panel
1 Align the control panel with the slot on the array.
2 Slide the control panel into the array until:
The release tab clicks into place in PowerVault MD3600f.
–
See Figure 16-13.
–
The release pin clicks into place in PowerVault MD3620f.
See Figure 16-14.
3 Replace the hard drives in their respective slots. See "Installing a Hard
Drive" on page 246.
4 Connect all the power cables to the array.
5 Turn on the array and the host server.
2
control panel
Management: Installing Array Components
261