To rename a selected storage array:
1 Perform one of these actions:
In the AMW Setup tab, select Rename Storage Array.
•
In the EMW Devices tab Tree view, select EditRename.
•
In the EMW Devices tab Table view, select EditRename.
•
•
In the EMW Devices tab Tree view, right-click on the desired array
icon and select Rename.
The Name/Rename Storage Arrays dialog is displayed.
2 Select the relevant storage array from the Select storage array table.
If you do not know the name or physical location of the storage array, click
Blink. After locating the storage array, click OK to turn off the LEDs.
The name of the storage array is displayed in the Storage array name.
3 In Storage array name, type the new name of the storage array. If
applicable, add a comment for the storage array in Additional comment.
4 Click Apply.
A message is displayed warning you about the implications of changing the
storage array name.
5 Click Yes.
The new storage array name is displayed in the Select storage array table.
6 Repeat step 2 through step 4 to name or rename additional storage arrays.
NOTE:
74
Configuration: About Your Storage Array
Avoid arbitrary names or names that may lose meaning in the future.