To define a host:
1 In the AMW, select the Mappings tab and select the appropriate storage array.
2 Perform one of the actions:
Select MappingsDefineHost.
•
Select the Setup tab, and click Manually Define Hosts.
•
•
Select the Mappings tab. Right-click the root node (storage array
name), Default Group node, or Host Group node in the Topology
pane to which you want to add the host, and select DefineHost
from the pop-up menu.
The Specify Host Name window is displayed.
3 In Host name, enter an up to 30-character alphanumeric name.
4 Select the relevant option in Do you plan to use the storage partitions in
the this storage array? and click Next.
The Specify Host Port Identifiers window is displayed.
5 Select the relevant option to add a host port identifier to the host, you can
select:
Add by selecting a known unassociated host port identifier—In
•
Known unassociated host port identifiers, select the relevant host
port identifier.
•
Add by creating a new host port identifier—In New host port
identifier, enter a 16 hexadecimal character name and an up to 30
character Alias for the host port identifier and click Add.
NOTE:
through F and numbers 0 through 9
6 Click Next.
The Specify Host Type window is displayed.
7 In Host type, select the relevant operating system for the host.
The Host Group Question window is displayed.
8 In this window, you can select:
Yes—this host shares access to the same virtual disks with other hosts.
•
The host port identifier name is in hexadecimal and must contain the letters A
.
Configuration: About Your Host
91