NEC DIRECTION L Service Manual page 86

Figure 5-6 The 3 1/2-Inch Device Bracket Screws
Slide the 3 1/2-inch hard disk drive towards the back of the system unit until it is
4.
free of the molded plastic.
Remove the screw on the side of the hard disk securing it to the bracket.
5.
Figure 5-7 Removing the Securing Screw
Slowly pull the hard disk away from the bracket and lift the disk out of the two
6.
securing tabs on the opposite side of the bracket.
Disassembly and Reassembly 5-7